Sansel Instruments And Controls

Model : PAM 204

Measurement Range :
0–1 m/s & 197 fpm, 0–2 m/s & 394 fpm, 0–5 m/s & 984 fpm,
0–10 m/s & 1967 fpm, 0–20 m/s & 3937 fpm (any one factory preset)

Resolution : 0.01 m/s & 1 fpm

Accuracy : ± 5% of Full Scale

Display : 2.8” True Colour TFT with touch screen

Application Environment Range : –10 to 60°C ; 0 to 100% RH (non-condensed)

Storage Environment Range : –10 to 45°C ; 10 to 90% RH

Display Refresh Rate : 1 second (typical)

Datalogging Interval : 1 sec to 24 hours (user selectable)

Data Download : Via USB-C to PC software (Sansel-Soft-01)

Calibration : 2-point calibration feature available

Alarm : Audible & visible, user-settable high & low alarms

Touch Sound : On / Off option available

Battery Charging Port : USB-C type

Integrated Battery : 3.7 V / 10,000 mAh rechargeable Li-ion battery

Backlight Time Interval : Adjustable from OFF to 59 min : 59 sec

Brightness Adjustment : 10% to 100% (user adjustable)

Housing Material : ABS with anti-slip grip silicon cover

Protection Class : IP40

Dimension (L × B × H) : 35 × 80 × 165 mm

Weight : 560 g (Approx.)

Model : PAM 204

Measurement Range :
0–1 m/s & 197 fpm, 0–2 m/s & 394 fpm, 0–5 m/s & 984 fpm,
0–10 m/s & 1967 fpm, 0–20 m/s & 3937 fpm (any one factory preset)

Resolution : 0.01 m/s & 1 fpm

Accuracy : ± 5% of Full Scale

Display : 2.8” True Colour TFT with touch screen

Application Environment Range : –10 to 60°C ; 0 to 100% RH (non-condensed)

Storage Environment Range : –10 to 45°C ; 10 to 90% RH

Display Refresh Rate : 1 second (typical)

Datalogging Interval : 1 sec to 24 hours (user selectable)

Data Download : Via USB-C to PC software (Sansel-Soft-01)

Calibration : 2-point calibration feature available

Alarm : Audible & visible, user-settable high & low alarms

Touch Sound : On / Off option available

Battery Charging Port : USB-C type

Integrated Battery : 3.7 V / 10,000 mAh rechargeable Li-ion battery

Backlight Time Interval : Adjustable from OFF to 59 min : 59 sec

Brightness Adjustment : 10% to 100% (user adjustable)

Housing Material : ABS with anti-slip grip silicon cover

Protection Class : IP40

Dimension (L × B × H) : 35 × 80 × 165 mm

Weight : 560 g (Approx.)

Model: POM 203 measures temperature (°C), water activity (aw), and converts these into water content (ppm, mg/kg) using oil-specific saturation data.

Range: –40 to +100°C (T), 0 to 1 aw, 0 to 100,000 ppm (x); actual range depends on oil type and ppm valid from 0 to 100°C.

Resolution: 0.01°C / 0.01 aw / 0.01 ppm

Accuracy: ±0.2°C @ 20°C in oil

Display: 2.8” true colour TFT touchscreen

Display Refresh Rate: 1 second (typical)

Display Parameters: Water Activity (aw), Temperature (T), Water Content (x)

Temperature Working Range: Storage –40 to +60°C, Ambience –40 to +60°C, Oil –40 to +80°C / –40 to +100°C

Units: °C, aw (0–1), ppm (mg/kg)

Applications: Transformers, hydraulics, turbines, compressors, marine engines, industrial lubrication systems

Data Logging Interval: 1 sec to 24 hrs (user selectable)

Data Download: USB Type-C to PC software (Sansel-Soft-01)

Calibration: 2-point calibration for temperature and humidity

Alarm: Audible & visible, user-settable high & low limits

Touch Sound: On / Off

Integrated Battery: 3.7 V / 10,000 mAh rechargeable polymer Li-ion

Charging Port: USB-C

Backlight Time: Adjustable 0 to 59 min 59 sec

Brightness Adjustment: 10% to 100%

Application Environment: –10 to 60°C / 0 to 100% RH (non-condensed)

Storage Environment: –10 to 45°C / 10 to 90% RH

Pressure Working Range: 0 to 20 bar (0 to 290 psi)

Housing Material: ABS with anti-slip silicone grip

Protection Class: IP40

Overall Dimension (L × B × H): 35 × 80 × 165 mm

Instrument Weight: 560 g (Approx.)

Model: DPM 202

Measurement Range: –40 °C to +100 °C (Temperature), 0 to 1 aw (Water Activity), 0 to 100000 ppm (Water Content)

Resolution: 0.01 °C / 0.01 aw / 0.01 ppm

Accuracy: ±0.2 °C at 20 °C (in oil)

Display: 2.8” True Colour TFT with Touch Screen

Display Refresh Rate: 1 second (typical)

Data Logging Interval: 1 second to 24 hours (user selectable)

Data Download: Via USB Type-C to PC software (Sansel-Soft-01)

Alarm: Audible & visible, user-settable high & low alarms for all parameters

Calibration: 2-point calibration for temperature & humidity

Touch Sound: On / Off option available

Integrated Battery: 3.7 V / 10,000 mAh rechargeable polymer Li-ion battery

Battery Charging Port: USB-C type

Backlight Time Interval: Adjustable from OFF to 59 minutes : 59 seconds

Brightness Adjustment: 10% to 100%

Application Environment Range: –10 °C to +60 °C ; 0% to 100% RH (non-condensed)

Storage Environment Range: –10 °C to +45 °C ; 10% to 90% RH

Pressure Working Range: 0 to 20 bar (0 to 290 psi)

Housing Material: ABS with anti-slip grip silicon cover

Protection Class: IP40

Dimension (L × B × H): 35 × 80 × 165 mm

Weight: Approximately 560 g

Model: DPM 202

Measurement Range: –40 °C to +100 °C (Temperature), 0 to 1 aw (Water Activity), 0 to 100000 ppm (Water Content)

Resolution: 0.01 °C / 0.01 aw / 0.01 ppm

Accuracy: ±0.2 °C at 20 °C (in oil)

Display: 2.8” True Colour TFT with Touch Screen

Display Refresh Rate: 1 second (typical)

Data Logging Interval: 1 second to 24 hours (user selectable)

Data Download: Via USB Type-C to PC software (Sansel-Soft-01)

Alarm: Audible & visible, user-settable high & low alarms for all parameters

Calibration: 2-point calibration for temperature & humidity

Touch Sound: On / Off option available

Integrated Battery: 3.7 V / 10,000 mAh rechargeable polymer Li-ion battery

Battery Charging Port: USB-C type

Backlight Time Interval: Adjustable from OFF to 59 minutes : 59 seconds

Brightness Adjustment: 10% to 100%

Application Environment Range: –10 °C to +60 °C ; 0% to 100% RH (non-condensed)

Storage Environment Range: –10 °C to +45 °C ; 10% to 90% RH

Pressure Working Range: 0 to 20 bar (0 to 290 psi)

Housing Material: ABS with anti-slip grip silicon cover

Protection Class: IP40

Dimension (L × B × H): 35 × 80 × 165 mm

Weight: Approximately 560 g

Model: HTD 200

Display: 2.8” True colour TFT display with touch screen

Range: Temperature: -40 to 85 °C Humidity: 0 to 100% RH

Resolution: 0.01 °C / 0.01 % RH

Accuracy at 23 °C± 5 °C: ±0.2°C / ±0.8 % RH

Psychometric calculated indication: Dew / Frost point ( Dp / Fp ) , Wet Bulb Temperature ( Tw ) , Vapour partial pressure ( E ) , Vapour Saturation pressure ( Ew ) , Mixing ratio by weight (dry) ( g / kg ) , Enthalpy ( H ) ( KJ / kg ) , Specific Humidity (moisture) ( g / kg ) , Absolute Humidity (moisture) ( g / m³ ) , Volume mixing ratio (dry) ( ppm )

Calculation method: WMO method

Display refresh rate: 1 s (typical)

Calibration: 5 point lookup table for both Temperature & Humidity

Alarm: Audible & Visible user settable individual High & Low alarm set with alarm mode selection for all the 3 parameters

Touch sound: On / Off option available

Logging interval: 1 sec to 24 Hrs programmable

Memory capacity: 4 to 32 GB Internal storage

Data download: Via USB

Battery charging port: USB C type

Integrated battery: 3.7V / 10,000 mAh Inbuilt rechargeable polymer Li-ion battery

Backlight time interval: 0(OFF) to 59 mins : 59 secs (user adjustable)

Brightness adjustment: 10 to 100% (user adjustable)

Application environment range: -10 to 60 °C / 0 to 100% RH (non condensed)

Storage environment range: -10 to 45 °C / 10 to 90% RH

Housing material: ABS with anti-slip grip silicon cover

Protection class: IP40

Overall Dimension in mm: 35 × 80 × 165 mm ( L x B x H )

Instrument Weight: 560 g (Approx.)

Model: POM 203 measures temperature (°C), water activity (aw), and converts these into water content (ppm, mg/kg) using oil-specific saturation data.

Range: –40 to +100°C (T), 0 to 1 aw, 0 to 100,000 ppm (x); actual range depends on oil type and ppm valid from 0 to 100°C.

Resolution: 0.01°C / 0.01 aw / 0.01 ppm

Accuracy: ±0.2°C @ 20°C in oil

Display: 2.8” true colour TFT touchscreen

Display Refresh Rate: 1 second (typical)

Display Parameters: Water Activity (aw), Temperature (T), Water Content (x)

Temperature Working Range: Storage –40 to +60°C, Ambience –40 to +60°C, Oil –40 to +80°C / –40 to +100°C

Units: °C, aw (0–1), ppm (mg/kg)

Applications: Transformers, hydraulics, turbines, compressors, marine engines, industrial lubrication systems

Data Logging Interval: 1 sec to 24 hrs (user selectable)

Data Download: USB Type-C to PC software (Sansel-Soft-01)

Calibration: 2-point calibration for temperature and humidity

Alarm: Audible & visible, user-settable high & low limits

Touch Sound: On / Off

Integrated Battery: 3.7 V / 10,000 mAh rechargeable polymer Li-ion

Charging Port: USB-C

Backlight Time: Adjustable 0 to 59 min 59 sec

Brightness Adjustment: 10% to 100%

Application Environment: –10 to 60°C / 0 to 100% RH (non-condensed)

Storage Environment: –10 to 45°C / 10 to 90% RH

Pressure Working Range: 0 to 20 bar (0 to 290 psi)

Housing Material: ABS with anti-slip silicone grip

Protection Class: IP40

Overall Dimension (L × B × H): 35 × 80 × 165 mm

Instrument Weight: 560 g (Approx.)

Model: POM 203 measures temperature (°C), water activity (aw), and converts these into water content (ppm, mg/kg) using oil-specific saturation data.

Range: –40 to +100°C (T), 0 to 1 aw, 0 to 100,000 ppm (x); actual range depends on oil type and ppm valid from 0 to 100°C.

Resolution: 0.01°C / 0.01 aw / 0.01 ppm

Accuracy: ±0.2°C @ 20°C in oil

Display: 2.8” true colour TFT touchscreen

Display Refresh Rate: 1 second (typical)

Display Parameters: Water Activity (aw), Temperature (T), Water Content (x)

Temperature Working Range: Storage –40 to +60°C, Ambience –40 to +60°C, Oil –40 to +80°C / –40 to +100°C

Units: °C, aw (0–1), ppm (mg/kg)

Applications: Transformers, hydraulics, turbines, compressors, marine engines, industrial lubrication systems

Data Logging Interval: 1 sec to 24 hrs (user selectable)

Data Download: USB Type-C to PC software (Sansel-Soft-01)

Calibration: 2-point calibration for temperature and humidity

Alarm: Audible & visible, user-settable high & low limits

Touch Sound: On / Off

Integrated Battery: 3.7 V / 10,000 mAh rechargeable polymer Li-ion

Charging Port: USB-C

Backlight Time: Adjustable 0 to 59 min 59 sec

Brightness Adjustment: 10% to 100%

Application Environment: –10 to 60°C / 0 to 100% RH (non-condensed)

Storage Environment: –10 to 45°C / 10 to 90% RH

Pressure Working Range: 0 to 20 bar (0 to 290 psi)

Housing Material: ABS with anti-slip silicone grip

Protection Class: IP40

Overall Dimension (L × B × H): 35 × 80 × 165 mm

Instrument Weight: 560 g (Approx.)